W211/R230 ABS/SBC Tool Repair Code C249F OBD2 SBC Reset Tool for Benz

Description

W211/R230 ABS/SBC Tool Fit for Mercedes Benz
Product description:
1  directly through the OBD-11 repair SBC internal computer fault code C249F, no need to open ABS assembly, convenient and quick fix SBC completed within 10 seconds of data, a key to complete the operation.
2 SBC to repair the data first four models: 25% -50% -70% -100% user choice.
Note:
Before your place the order,pls check the
chassis type
of your car  and the
SBC Type
.Make sure the chassis type is
W211/R230
SBC TOOL Support Type:
BOSCH NR: 0 265 960 012
BOSCH NR: 0 265 960 013
BOSCH NR: 0 265 960 015
BOSCH NR: 0 265 960 018
BOSCH NR: 0 265 960 019
BOSCH NR: 0 265 960 020
BOSCH NR: 0 265 960 023
BOSCH NR: 0 265 960 025
BOSCH NR: 0 265 960 028
The instruction as follows:
TIPS:
CODE C249F
, OPERATION TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT)
The above tips that show internal fault of control unit, you have to replace the SBC control module and using W211/R230 TOOL that can be easily repaired without replace the new control module.
Fit For Mercedes Benz's Safety Precautions had stated that before attempting to repair the brake system on its models W211 (E Class) and R230 (SL Class), the Sensotronic Brake Control (SBC) system must be deactivated first using its STAR-DIAGNOSIS tester.
Deactivation of the SBC system is absolutely necessary before carrying out any maintenance work onthe brakes like changing of pads, discs and fluids because the system is under a pressure of 140 bars. Mechanics who perform brake services on these car models must have the proper tools to avoid the risk of injuries to themselves and damage to the brake system.
Until the introduction of this inexpensive, convenient, light, safe and easy to use SBC tool is another alternative to the STAR-DIAGNOSIS tester when working on SBC system. It can perform the tasks equally well which is efficient and safety.
After the repair had done, the SBC system can be activated and restore back its pressure. The memory is erased automatically.
- Quick, easy operations with LED indications.
- Safe to use
- Power ON when plugged into vehicle's OBDII diagnostic connector.
- Light, compact and very convenient.
- Stand alone unit.
This SBC tool works on W211 (E-Class) and R230 (SL-Class) with SBC systems.
It is ideally suited for:
- Brake centers
- Independent Fit for Mercedes Ben z workshops
- Tire Service centers
- Service garages
- Quick service centers
- Fit For Mercedes Ben z Specialist centers
- Automotive Repair Workshops
Products, follow these steps:
1. An OBD Fit for BENZ SBC TOOL 16PIN connector into the vehicle's OBD-11 communications port;
2. Turn the ignition switch to ON, then OBD fit for BENZ SBC TOOL power light lit, and the device will call and the second tone, said the device is working properly;
3. and then need to restore the maintenance mode switch (25% -50% -75% -100% can be selected) at this time there will be frequency BUSY indicator light, and the device will beep tones, 10 seconds to complete data recovery, whichAlways when the BUSY indicator.
Package including:
1pc x W211/R230 ABS/SBC Tool
1pc x OBD2 Cable