USA GODIAG GT100+ Pro OBD2 Break Out Box ECU Connector Protocol Detector

Description

Product Description
International Buyers - Please Note:
If you need to return the item for some reasons,
pls contact us via ebay message at the fist time
to get the
RMA# and return address
instead of sending back directly without permission.Thank you!
GODIAG
GT100+ GT100 Pro
OBDII Breakout Box ECU Bench Connector with Electronic Current Display
New Version Communication Detection Tool:
GODIAG GT100 ECU Bench connector is the latest testing platform for OBD2 protocol communication detection and ECU maintenance/ diagnosis/ programming /coding.
Flexible Conversion:
The OBD2 can bus breakout box device can convert the onboard OBD2 interface into 16 pins for signal detection and substitution conversion. It can be connected to single or multiple modules of the vehicle.
When you replace the battery, ECU Connection Kit can also power the car, lose the car control module data, automatically lock the data, reset the key controller and the fault indicator light is on.
Wide Compatibility:
GT100 ECU Connection Kit has strong compatibility, including an OBD2 scanning tool, connect multiple ECU control modules, OBD2 card reader, car tester, and other equipment connections, it can be connected with any car diagnostic tool.
GODIAG GT100+
Highlights:
1. Update of GT100, Added Electronic Current Display.
2. ECU connection + OBDII Protocol Detector + Electronic Current Display.
3. The cable can be extended, with an Optional dedicated adapter.
4. Work together with Xhorse VVDI2, Autel devices, Launch, Foxwell etc.
5. Convert OBD1 diagnostic interface to the standard OBD2 diagnostic interface.
6. Used with BMW-CAS4 Adapter Test Platform.
7. One Year Warranty.
GODIAG GT100+ Details:
1.
GT100+ adds Electronic Current Display.
On bench connect the ECU module by using the banana connector or db25 dedicated ECU adapter, Godiag GT100+ will display the electronic current.
The advantage to
display electronic current value:
The user can intuitively see the current status of the ECU. There is no current display or the actual displayed current is inconsistent with the engineer’s expected current, then you can immediately check whether the wiring is wrong, if the wiring is correct, he can judge that the ECU may be broken, so there is no need to perform diagnostic communication and can directly repair the ECU.
If it shows too much current, then you can also determine if the cable is incorrectly connected or the ECU is broken.
2. GT100+
Adds CANBUS Protocol Communication
GT100+ Pin 1, 9, 3, 11 12, 13, 8 [corresponding to the yellow banana connector on the machine], these non-standard obd2 protocol interface may display CAN BUS or K-Line communication protocol. GT100 can only display K-Line Pwm Vpw+ KWP 2000 protocol. GT100+ will display CANBUS K-Line Pwm Vpw+ KWP 2000 protocol communication.
3.
Reset instrument/immobilizer when all keys lost
When you want to program key for VW, Porsche, Mitsubishi and nother cars with all keys lost, or to program Toyota ECU, you need to activate the dashboard (reset instrument) or wake up the immobilizer module first. Then you can operate directly by using GT100 GT100+.
a.
To replace the engine ECU of Toyota or to use some key programmer to program Toyota when all keys lost, it requires to short-circuit PIN13-PIN4
b.
To program Mitsubishi key with all keys lost or to set OBDII when all remote keys lost, please short-circuit PIN1-PIN4.
c.
For Porsche and VAG 4th generation / 5th generation keys (for example new A6L Touareg A4 Q5 A7), please use GT100+ to short-circuit banana connector PIN 16—-PIN 1 to lit up the dashboard, after that use the key programming tool to connect with the female adapter of GT100+ for data collection. Some vehicle dashboards won’t be lit up, but data can also be collected, for example: A6L Q7.
Package includes:
1pc x Host
1pc x OBD 2-in-1 extension cable
1pc x Colored jumper cable
1pc x Power supply 12V
1pc x Resistance 120 ohm
6pcs x Banana plug
24pcs x Wire accessories, Dupont 2.54mm connector female pins
Please Note
Warranty
Feedback
Payment
Contact US
If  you need to return the item for some reasons, please contact us via eBay message at the first time to get the RMA# and return address instead of sending back directly without permission,thank you!
1. Most of our items have
3 years warranty.
2. All our items have been tested good before shipping.
3. We provide buyer return and refund service. If you are not satisfied when you receive your item,
please return it within 30 days for a replacement or money back. Buyer pay the shipping cost.
If you are satisfied with our items and service, Your positive feedback with good full stars to the
5 DSR
s
will be much appreciated.
If you are not satisfied with your shopping experience, please contact us before you decide to leave a neutral or negative feedback.
Since Neutral or Negative feedback won't solve any question. We will do our best to solve the problem for you as soon as possible.
1.We only accept paypal.
2.Please make payment within 7 days after auction ended, if not,we have to open an unpaid cace to get our final value fee back from ebay.
So please contact us timely before we take this action.Thanks!
3.We don't responsible for any custom duty or import cost.
4.Please tell us the value/name of the item you want for custom delaration if you have any special requirement,or we will fill the custom
declaration which is suitable for most countries accordingly.
If there is any problem, please contact with us by eBay message First, we will reply you within 48 hours,.
Sorry for delay reply on weekend.
Welcome to visit my store
carobdtool88
Please Note
If  you need to return the item for some reasons, please contact us via eBay message at the first time to get the RMA# and return address instead of sending back directly without permission,thank you!
Warranty
1. Most of our items have
3 years warranty.
2. All our items have been tested good before shipping.
3. We provide buyer return and refund service. If you are not satisfied when you receive your item,
please return it within 30 days for a replacement or money back. Buyer pay the shipping cost.
Feedback
If you are satisfied with our items and service, Your positive feedback with good full stars to the
5 DSR
s
will be much appreciated.
If you are not satisfied with your shopping experience, please contact us before you decide to leave a neutral or negative feedback.
Since Neutral or Negative feedback won't solve any question. We will do our best to solve the problem for you as soon as possible.
Payment
1.We only accept paypal.
2.Please make payment within 7 days after auction ended, if not,we have to open an unpaid cace to get our final value fee back from ebay.
So please contact us timely before we take this action.Thanks!
3.We don't responsible for any custom duty or import cost.
4.Please tell us the value/name of the item you want for custom delaration if you have any special requirement,or we will fill the custom
declaration which is suitable for most countries accordingly.
Contact US
If there is any problem, please contact with us by eBay message First, we will reply you within 48 hours,.
Sorry for delay reply on weekend.
Welcome to visit my store
carobdtool88
powered by