Leader LV5700A Portable Multi SDI Waveform Monitor / Vectorscope Rasterizer OP76

Description

Sellercore: HTML Preview
PCXUSA
Leader LV5700A Portable Multi SDI Waveform Monitor
Vectorscope Rasterizer OP76
FULLY TESTED, INCLUDES POWER CORD, MINOR SCRATCHES ON CASE, THE FAN IS A LITTLE LOUD BUT IT DOESN'T AFFECT THE PERFORMANCE OF THIS DEVICE
Leader
LV5700A-OP76
Model Details
The LV 5700A is a Multi SDI Monitor for HD/SD-SDI signals with an XGA TFT color LCD in an adjustable tilt front panel. The monitor tests 14 HD-SDI and SD-SDI formats with total digital processing compliant to SMPTE 259M, SMPTE 292M and SMPTE 296M. Input format, colorimetry and trilevel or black burst external reference inputs are automatically detected. Extensive monitoring functions include waveform (YCbCr, YRGB, YGBR, RGB or GBR), vector (75% or 100% graticules), picture and surround sound monitoring modes. The first SDI module accepts two SDI inputs switchable from the front panel providing buffered SDI output(s) of the selected feed. Parade, overlay and timing modes facilitate characterization of component waveform levels and timing. Freeze mode allows comparisons of different SDI input signals. Multi-display operating modes include a thumbnail picture display. Digital audio from HD/SD groups (1 & 2) or (3 & 4) are disembedded and output as four pairs of AES/EBU. Digital audio is also displayed as 3:1, 3:2, or 3:2:2 surround images, multi-lissajous and 8-Ch bargraphs. The peak bargraphs have selectable dynamic ranges as well as average ballistics. Remapping of the channel order allows users to create custom displays. High Resolution decoded pix-monitor outputs may be set to feed monitor requirements as either YPbPr or GBR. Digital line-select, precision digital cursors, menu control of storage of 100 front-panel setups, flash card, USB and Ethernet round out the operating features. The HD/SD status screens list detection of input format, TRS, CRC checks for chroma and luma, video, audio ID, ancillary parity and check sum errors& User adjustable alarm error thresholds are provided for digital component level ranges. Ethernet allows full remote control operation and monitoring of operating conditions including alarms. HD/SD eye pattern analysis with automatic measurements is an option. DC operation is also available as an option.
Features:
• Monitors SMPTE-259M, SMPTE-292M, SMPTE-296M
•
Auto Detection of Input 20 HD-SDI and SD-SDI
•
Selectable Colorimetry when needed
•
Auto Detection of Ext. Ref. BB/Tri-Level Sync
•
Switched SDI Output follows Selected Input
•
Total Digital Signal Processing
•
Multi-Display Modes with Thumbnail
•
Freeze Mode to Compare Input Signals
•
Data Dump for Detailed Pixel Analysis
•
Adjustable Alarm Thresholds
•
Parade/Overlay/Timing
(YCbCr/YRGB/YGBR/RGB/GBR)
•
Full Digital Line Select
•
Electronic Graticules Selectable
•
Precision Digital Cursors
•
Timing for Component Interchannel Errors
•
Display Modes for Active and H Blanking
•
Vector Magnification (x2, x5 and P-Mag)
•
Selectable I&Q Axes and 100%/75% Targets
•
Integrated XGA TFT Color LCD Display
•
Picture Monitor Output YPbPr or GBR
•
XGA Output for Computer Display
•
Front Panel Tilt Adjust
•
Disembedded Digital Audio Outputs
•
Surround Modes (3-1, 3-2, 3-2-2)
•
Multi-Lissajous for System Phase Checks
•
8-Channel Bargraph (Peak 60 or 90 dB)
•
Selectable Audio Groups 1&2 or 3&4
•
Selectable Channel Assignments
•
Auto ID 16-Channels of Embedded Audio
•
Cable Length (Patented)
•
100 User Presets
•
Flash Card for Capture, Logging, Presets & Mirroring
•
HD/SD Eye Pattern Auto Measurements (Option 70)
•
DC Operation (Option71)
•
Additional HD/SD-SDI Module (Option72)
Specifications:
Video Format
HD-SDI
Video System:
1
2
1920x1035 / 60i
1920x1035 / 59.94i
3
4
5
6
7
8
9
10
11
12
13
14
1920x1080 / 60i
1920x1080 / 59.94i
1920x1080 / 50i
1920x1080 / 30p
1920x1080 / 29.97p
1920x1080 / 25p
1920x1080 / 24p
1920x1080 / 23.98p
1920x1080 / 24sF
1920x1080 / 23.98sF
1920x720 / 60p
1280x720 / 59.94p
Standards Supported
HD-SDI Standard:
Ancillary Data Standard:
Embedded Audio Standard:
SMPTE 292M
SMPTE 291M
SMPTE 299M
SD-SDI
Video System:
1
525 / 59.94i
2
625 / 50i
Standards Supported
SD-SDI Standard:
Ancillary Data Standard:
Embedded Audio Standard:
SMPTE 259M
SMPTE 291M
SMPTE 272M
Format Setting
Video System: Select manual setting or automatic setting
Sampling Frequency
HD: Auto switching
between 74.25 MHz and 74.25/1.001 MHz
SD: 13.5 MHz
Input/Output Connector
HD-SDI Input
Input Connector:
BNC connector  2 systems A and B, 75 W
External Reference Input
Input Signal:
Tri-level sync signal or NTSC/PAL black burst
Input Connector:
BNC connector passive loop-through
1 system 2 connectors
XGA Output
Output Signal:
Output Connector:
XGA signal
D-sub 15 pin female
HD-SDI Output
Output Connector:
BNC connector 1 connector
Outputs the selected channel, 75 W
Analog Output
Output Signal:
Output Connector:
Y, PB, PR or GBR
BNC connector  1 system 3 connectors
AES/EBU Output
Output Signal:
CH1/2, CH3/4, CH5/6, CH7/8
Separated from embedded audio and output
Select 2 groups (8 ch) from 4 groups (16 ch)
Output Connector:
BNC connector  4 connectors
Remote Connector
Function:
Recalling of presets
Control Signal:
TTL level (LOW active)
Control Connector:
D-sub 25 pin female  1 connector
Ethernet Connector
Function:
Remote control from an external
computer and monitoring of errors, etc.
Input/Output Connector:
10BASE-T  1 connector
Display Format
Display Format
XGA effective area 1024x768 dots
Dot Clock
65 MHz or 64.935 MHz
(Automatically switch according to the input signal)
Horizontal Frequency
48.363 kHz or 48.315 kHz
(Automatically switch according to the input signal)
Vertical Frequency
60 Hz or 59.94 Hz
(Automatically switch according to the input signal)
Multi Display
Displays waveform display, vector display, picture display,
and status display on a single screen side by side
Magnified Waveform Display
Displays video signal waveforms magnified on the entire screen
Magnified Vector Display
Displays vector waveforms magnified on the entire screen
Magnified Picture Display
Displays color pictures magnified on the entire screen
Magnified Audio Display
Displays embedded audio magnified on the entire screen
Waveform Display
Waveform Operation
EAV-SAV Period:
Select show/hide
GBR Conversion:
Select Y, PB, PR or
GBR conversion display
Sweep Magnification:
Select x1 or x5
Channel Assignment:
Select GBR order or RGB
order during GBR conversion display
Vertical Axis
Filter:
Flat, low-pass
Horizontal Axis
Operation Mode
Overlay:
Displays multiple waveforms overlaid
Parade:
Displays waveforms side by side
Timing:
Measures the time difference and the amplitude
difference between channels
Uses bowtie signals
(Authorized by Tektronix, Inc.)
Display Format
Line Display:
1H, 2H, 3H
Line Magnification:
1H MAG, 2H MAG, 3H MAG
Field Display:
1V
H Blanking Display:
Displays the H blanking period
V Blanking Display:
Displays the V blanking period
Scale
Scale Display
Voltage Scale:
0 V to 0.8 V, -0.4 V to 0.8 V
% Scale:
0 % to 110 %, -50 % to 120 %
Vector Display
Sweep Magnification
Select from x1, x2, P-MAG, and x5.
Scale
Color bar switching type between 75 % and 100 %
EAV-SAV Period
Show/hide is synchronized with the waveform display setting
I, Q Axes
Show/hide is a switching type
Picture Display
HD Display
Reduced display
SD Display
Magnified display
Embedded Audio Display
Lissajous Display
Display Channel:
Select from 2 ch or 8 ch display
Display Method:
Select X-Y or L-R
Sound Image Display
Display Channel:
Select from 3-1 ch, 3-2 ch,
and 3-2-2 ch displays
Peak Level Meter Display
Display Channel:
Simultaneous 8 ch display
Display Method:
Peak meter
Channel
Ch Mapping:
Can be mapped arbitrary from 1 ch to 8 ch
User Bit Display
Data Dump Display:
Displays 192 bits sequentially
Analysis Display:
Analyzes and Displays the user bit
Data Dump Display
Display Format
Displayed separately by serial data sequence or channel.
Digital Signal Analysis
CRC Error
Detects video signal errors
BCH Error
Detects embedded audio errors
Checksum Error
Detects ANC data errors
Parity Error
Detects ANC data errors
TRS Error
Detect TRS errors
EDH Error
Detects EDH errors
Line Number
Detects line number errors
Gamut Error
Detects level overrange of GBR video signals
Level Error
Detects vide level and reserved data error
Audio Sequency
Detects continuity errors of embedded audio
Format Detection
Detects the SDI video signal format
Audio Information Detection
Detects the presence or absence of embedded audio on
each channel
Detects the sampling frequency for each group
Displays voice control packets
External Sync Lock Detection
Detects the synchronization relationship between
the external synchronization signal and the SDI signal
Equivalent Cable
Length Measurement
Measures the SDI signal level
Displays the cable length converted to 800 mVp-p signal
source level
Signal Detection
Detects the presence or absence of SDI signals
Line Selector
Operation Mode
Interlocked type between waveform display,
vector display, and picture display
Preset
Number of Presets/Items
8 points/all settings
Recall
Through the front panel, remote connector, and Ethernet
Up to 8 points of recall from the remote connector
Cursor Measurement
Configuration
Horizontal cursor: 2 lines (REF, D )
Vertical cursor: 2 lines (REF, D )
Amplitude Measurement
Measured in [%] and [V]
Time Measurement
Displayed in [µs] and [ms]
Frequency Measurement
Displays the frequency in which the time between cursors
is considered a cycle.
Environmental Conditions
Operating Temperature
0 to +40 °C
Operating Humidity
10 to 80 % RH (without condensation)
Spec Guaranteed Temperature
+10 to +30 °C
Spec Guaranteed Humidity
10 to 80 % RH (without condensation)
Operating Environment
Indoor use
Operating Altitude
Up to 2,000 m
Overvoltage Category
II
Pollution Degree
2
Power Requirements
90 to 250 VAC (50 Hz/60 Hz), 120 W max.
9 to 17 VDC(Optional), 110 W max.
Dimensions and Weight
Dimensions (W x H x D) 215 x 133 x 448 mm
8 ¾ x 5 ¼ x 17 5/8 in.
Accessories
Fuse.....1
25-pin D-sub connector.....1
25-pin D-sub connector cover.....1
Cover, inlet stopper.....1
Screw, rack mounting (inch size).....2
Power cord.....1
Instruction manual.....1
Additional Detailed Information:
*W01*
Shipping Information Title
We will ship it
professionally with good method and extra material.
Condition: seller refurbished, tested
, 30 days warranty
.
LOCAL PICKUP IS ALWAYS AVAILABLE Hackensack, New Jeresy off Route 80 Exit 66
Terms of Sale
Return policy
After receiving the item, contact seller within
Refund will be given as
Return shipping
30 days
Money back
Buyer pays for return shipping
Refer to
eBay Return policy
for more details. You are covered by the
eBay Money Back Guarantee
if you receive an item that is not as described in the listing.
Payment details
Payment method