IKEGAMI TM20-20R 20 inch BROADCAST TV CRT Monitor RGB Component for Retro Gaming

Description

This is an Ikegami TM20-20R Broadcast quality monitor. It was manufactured in January of 1999. The screen measures 20 inches diagonally. There are tons of features, just look at the list below, but the short version is that it has inputs for RGB+sync, Component, and 3 composite signal inputs if you use the RGB inputs separately. There's the famous pull-out drawer in the front for changing settings and a wheel for dialing in minute changes. It has a built in geometry grid pattern, focus pattern, and brightness/contrast test pattern. This unit is in decent cosmetic condition, a few scratches here and there(see pics.) I used the YP
bPr component input for the gameplay photos, so I imagine it looks even better with RGB!
I'm including 4 BNC male to RCA female adapters in case you need them for hookups. I won't even try to ship this baby because of its weight and fragility. Thanks for looking!
Check out this great video by RetroTech on this model of monitor!
https://youtu.be/z-G6piaFY-0
Model Details
700 TV lines at 35Fl Luminance for 100% of window signal, scans 50Hz-10MHz RGB & up to 7MHz Monochrome, Convergence area .3mm, Pitch .43 mm, RGB/NTSC/Y,R-Y,B-Y, Underscan 90% of Normal
Features:
High Performance Cathode Ray Tube
!
In-line Self Converging Electron Gun assures convergence stability.
!
Controlled Phosphors to ABS or EBU Standards provide consistent and
known colorimetry.
!
Black Matrix surrounding Phosphor Dots assures high contrast under
bright ambient lighting.
!
13V and 19V units available.
Digital Control System (DCS)
The preset control system is completely digitized with the 8 bit MPU and
the 10 bit D/A converter. It enables several status indications, and auto
setup capability with an optional PROBE (ASP-15C). Since a rotary
encoder for preset controls and variable resistors for manual controls
(CONTRAST,, BRIGHTNESS, CHROMA, HUE) are provided, the 20-
series monitors can be adjusted in the same manner as conventional
analog-controlled monitors.
Auto Setup System
By using an optional Auto Setup Prove (ASP-15C), the following
functions can be automatically setup at a reference level or stored in less
than 50 seconds.
!
CONTRAST
!
CHROMA
!
RGB BACKGROUND
!
BRIGHTNESS
!
HUE(NTSC)
!
GB GAIN
Remote Control Operation
An infrared remote controller (RCT-20) is provided as an option. With
each of them, the following functions can be remotely controlled for up
to 99 monitors.
!
DEGAUSS
!
DELAY SELECT
!
VIDEO SELECT
!
APERTURE ON/OFF
!
COLOR/MONO
!
RED GUN ON/OFF
!
WIDE/NORMAL/UNDERSCAN
!
GREEN GUN ON/OFF
!
MENU
!
SAFE TITLE
!
BLUE GUN ON/OFF
!
RGB BACKGROUND
!
H. PHASE
!
HUE
!
GB GAIN
!
HEIGHT
!
CHROMA
!
SYNC INT/EXT
!
WIDTH
!
CONTRAST
!
H. CENT
!
BRIGHTNESS
!
V. CENT
Beam Feedback System(BFS)
To insure long-term black level stability, the 20-series monitor incorporates
Beam Feedback System(BFS) which detects CRT cathode current deviation and
eliminates brightness changes due to changes in CRT emission.
Adaptive Comb Decoder*
By incorporating a CCD 1H delay line into the standard comb filter, cross
luminance and cross color are improved over conventional monitors. In
addition, by replacing it with an optional Adaptive Comb Filter Decoder*
(NTSC only), performances of 20-Series are significantly improved for
precision color monitoring or graphics display.
Improvements include:
!
Chroma edges are greatly improved by patented process based on use of
luminance transitions.
!
Dot crawl at chroma transitions is eliminated.
Wide Range of Input Capabilities
The 20-Series can accept 3 composite video inputs and an RGB or a component
(Y, R-Y, B-Y) input as standard. Optional plug-in decoder boards are available
for Digital (D1, D2, D3), PAL-B, SECAM, PAL-M TV standard systems.
Modular Concept
The 20-Series provides modular construction for ease of repair and adjustment.
The boards of video system are plug-in, and many of the boards can be removed
with the monitor mounted in a rack.
Specifications:
Input Voltage 100-120 / 200-240v
Input Power
160W
Standard Accessory
Remote connector, Power cable
Input Facilities
!
Input Signals *Encoded video
NTSC or PAL-B or PAL/SECAM or PAL-M 3ch
TM20/14-20RH….. NTSC Decoder standard
TM20/14-20RP….. PAL Decoder standard
Other decoders are options.
(*Two of them can be installed simultaneously
-two slots construction)
*R/G/B or Y,R-Y,B-Y
(MII or BETA switchable internally) 1ch
*D1(4:2:2), D2(D3) –Option
PARALLEL input 1ch
SERIAL input 2ch
SERIAL output 1ch(monitor OUT)
*Y/C (option) 1ch
!
Input Level *Encoded Video
Composite 1Vp-p
Non Composite 0.7Vp-p
*RGB 0.7Vp-p Non Composite
Sync on Green
No Sync on Red + Blue or
Sync Red Green Blue or External Sync
*Analog Component (Y, R-Y, B-Y)
MII Y signal White level 700mVp-p
(N10) Setup level 0mVp-p
(SMPTE) Sync level 300mVp-p
R-Y signal p-p level 525mVp-p
B-Y signal p-p level 525mVp-p
(100/0/75/0 Color bar)
Beta Y signal White level 714mVp-p
Setup level 53.6mVp-p
Sync level 286mVp-p
R-Y signal p-p level 700mVp-p
B-Y signal p-p level 700mVp-p
(100/7.5/75/7.5 Color bar)
*Y/C Y signal 1Vp-p
C signal 0.286Vp-p (burst level)
!
Connection Bridging BNC connectors, high impedance,
isolated from chassis ground.
!
Return loss Less than 46dB (up to 10MHz)
!
Crosstalk between adjacent channel
Less than 50dB (up to 6MHz)
!
Hum suppression 60dB with 4V RMS common mode rejection
!
Remote control (via 10 pin connector)
Video input selector (A/B/C)
AUX (RGB, Y/R-Y/B-Y)
Sync
Color killer (COLOR/MONO)
Tally (ON/OFF)
Display Device
In-line gun, shadow mask high resolution CRT
TM14-20RH/RP: 0.31mm
TM20-20RH/RP: 0.43mm
!
Chromaticity *ASP standard X Y
R 0.630 0.340
G 0.310 0.595
B 0.155 0.070
*EBU standard X Y
R 0.640 0.330
G 0.290 0.600
B 0.150 0.060
*Tolerance +/-0.005
!
Brightness/Contrast
*Preset Contrast
35Ft-L at factory setting(100% window signal)
*Max brightness
TM14-20RH/RP:More than 70Ft-L w/window signal
TM20-20RH/RP:More than 70Ft-L w/window signal
!
Resolution (at 35Ft-L)
TM14-20RH/RP: 700TV Lines (at center)
TM20-20RH/RP: 700TV Lines (at center)
Output Facilities (option)
Y 0.7Vp-p
R-Y 0.525Vp-p
B-Y 0.525Vp-p
(100/0/75/0 Color bar)
Video Signal System
!
RGB Response 50 ~ 10MHz +1, -3dB
!
Luminance
*Frequency Response
w/o Notch: +/-1dB at 50Hz to 7MHz
w/Notch: -30dB at 3.58MHz
w/comb: +/-1dB at 50Hz tttto 7MHz
(w/o Notch) (w/Notch) (w/Comb)
*2T pulse <+/-1% <+/-2% <+/-1%
to base line
*2T pulse <+/-1% <+/-2% <+/-1%
to Bar
*T step <1% <1% <1%
*Distortion <1% <1% <1%
*Square <1% <1% <1%
wave response
!
Linearity Differential Gain less than 2%
!
Black level varies: less than 1% (APL 10% ~ 90%)
!
Color temperature stabilities: less than 1% for 500hours,
+10’C ~ +40’C
!
Aperature correction
*Correction characteristics
Waveform of overshoot of 2T pulse appears
symmetrically with TRAP ON.
*Frequency response
60Hz to 100KHz: less than +/-1dB
1MHz: less than +2dB
2.5MHz less than +6dB
3.58MHz(NTSC): less than –15dB
4.43MHz(PAL): less than –15dB
!
Noise (at each RGB in active scan period)
Coherent Noise less than –46dB
Hum Noise less than –55dB
Other less than –55dB
Specifications
Color Signal System
w/COMB w/TRAP
!
Chrominance Suppression in >24dB >30dB
!
Luminance at 4.43 or 3.58MHz at 4.43 or 3.58MHz
!
Luminance Suppression in >20dB ----------
!
Chrominance at 4.43 or 3.58MHz at 4.43 or 3.58MHz
!
Chroma/Luma Delay <20nsec. <20nsec.
!
Chroma Signal Response
NTSC 2.3MHz to 4.9MHz: +1, -3dB
(reference 3.58MHz)
PAL-B 3.1MHz to 5.7MHz: +1, -3dB
(reference 4.43MHz)
!
Demodulator Axis
R-Y VS B-Y 90 degree
!
Oscillator Performance
Subcarrier Lock-in
+/-200Hz (NTSC/PAL-M)
+/-300Hz (PAL-B)
!
Phase Error Less than 2 degree for each of following individual
conditions:
a)Burst frequency: +/-10Hz
b)Burst level change: +6dB, -12dB
c)Ambient temperature change by +10’C
d)Sync-blanking within FCC requirement
!
Color Killer Automatic operation when burst level is less than 5
+/-1 IRE.
!
Adjustments *Chroma amplitude: +/-6dB
*Subcarrier phase: +/-15 degree
Raster + Deflection
!
Scan *Normal scan
Aspect ratio 4:3 with blanked raster 1%
*Under scan
Aspect ratio 4:3 approx. –7.5%
(adjustable 90% of normal scan)
*Over scan
105% of normal scan
!
Stability of Raster Size
1% of picture height 0 ~ 100% APL at 35Ft-L
reference
!
Linearity H + V line
0.5% of picture height
!
Geometry Entire Screen
0.5% of picture center
!
AFC Time Constant
Normal: 2msec
Fast: 0.5msec
Slow: 7msec
!
Retrace Time Horizontal: 0.9usec.
Vertical: 0.8msec.
!
High Voltage *Tolerance: TM14-20RH/RP 25kV+/-0.5kV
TM20-20RH/RP 25kV+/-0.5kV
*Regulation: within +/-1% at 0 to 450uA
!
Convergence Center: <0.3mm(within circle of 80% of picture
height)
Corners: <0.5mm(outside area of picture center)
Functions
!
Adaptive Comb Decoder (option)
!
Safe Title Generator
(100,95,90,85,80%, 100+90+80%, 5 CROSS
HATCH, 10 CROSS HATCH selectable)
!
Auto Setup (with an optional probe)
!
Infrared Remote Control (with an optional remote control box)
!
Test Signals *Cross Hatch, * Flat Field(50%), *Window (100%),
*10step stair signal with plugs as standard,
!
Video A/B Split (reference & variable vertical position)
!
Color/Mono Split (reference & variable vertical position)
!
Beam Feedback System
!
Menu Assist *Contrast, Brightness, Chroma, Hue, G. Gain,
B. Gain, R.BLG, G.BLG, B.BLG, Aperture Level,
Height, Width, V.Cent, H.Cent, Rotation, F.Focus,
H.Phase
*Safe Title Setup
*Split Setup
*System Setup
Decoder Select (NTSC/PAL-B/PAL-M/SECAM)
Test Signal ON/OFF
*Mode Setup
User Display ON/OFF
Aux RGB/Y,R-Y,B-Y
CH C / Y/C
Level Display ON/OFF
Control Lock Setup
Front Control
!
Outside of Drawer *Power ON/OFF
*Degauss ON
*Color/Mono
*Sync INT/EXT
*Video Select (A/B/C/Aux/Digital/Test/A-B split)
*Delay (H Delay, V Delay, HV Delay)
*Scan (UNDER. Normal, OVER)
*Aperture ON/OFF
*Screens (R/G/B ON/OFF)
*Safe Title ON/OFF
*Contrast, Brightness, Chroma, Hue Preset/Manual
!
Inside of Drawer *Setup ON/OFF
*AUTO/FORCED COLOR
*AFC Normal/Fast/Slow
*Residual Subcarrier
*File Control
*Rotary Encoder
*Preset Change
Contrast, Brightness, Chroma, Hue,
RGB Background, GB Gain,, Rotation,
Aperture Level, Fine Focus, Height,
Width, H Center, V Center, H Phase
Dimensions
TM14-20RH/RP:
450(W) x 265(H) x 515(D) mm
17.72(W) x 10.43(H) x 20.28(D) inches
TM20-20RH/RP:
450(W) x 399(H) x 515(D) mm
17.72(W) x 15.71(H) x 20.28(D) inches
Weight
TM14-20RH/RP: 26kg (57.3 lbs) approx.
TM20-20RH/RP: 38kg (83.8 lbs) approx.