DEFU 368A Vertical Auto Machine Car Household Multi Functional 180W 110V USA

Description

Product Description
International Buyers - Please Note:
If you need to return the item for some reasons,
pls contact us via ebay message at the fist time
to get the
RMA# and return address
instead of sending back directly without permission.Thank you!
368A Vertical Car Household Copy Cu-tting Machine Pi-c-k-ing Tool 110V
TOP 4 Reasons to Get 368A:
1. Multi functional practical machine, equipped with horizontal feeding movable handle
2. Multifunctional steel fixture, can copy various hollowness type,wave type,cylindrical key and key for multi lo-c-k and composite bead keys and some car keys,such as
For
BMW,
For
HONDA,
For
Vo-lks.wagen car keys
3. Fixture with dark duplication service pitch line and cylinder type key assembly function (multifunctional clamp)
4. With hardened ball bearing slide mechanism.
368A Copy Cu-tting Machine Parameters:
Power:                        220V/50hz
Dimension size:       30 *21*35cm
Weight:                       10kg (Volume weight)
Voltage:                      110V~220V
Frequency:                 50/60Hz
Plug Type:                  UK.USA.BR.CN.EU
Packing list:
1pc x 368A Cu-tt-ing Machine
How to Operate 368A Copy Cu-tti-ng Machine ?
The change of the cutter and leading needle:
1.Use inner hexagonal wrench to unclamp the regular screw anticl-o-ckwise direction.
2.Draw out the cutter and the lead needle downward,separate them from axis.
3.Insert the new cutter and leading needle in the axis,when suitable for in its flexble position(Fig.1),fix the screw to l-oc-k in c-lo-ckwise
direction with inner hexagonal wrench.
Note:
Cutter and lead needle must the same angle(hole type cut) or the same diameter(wave type cut), otherwise it is inaccureate to duplicate.
1. Pack original spoon and spoon base into jig group dupicate cylinder spoon spend synchronizer of the hole separately(Fig.6)
2. Pull spoon pressing device separately,pull the head outwards and keep it aim at spoon handle,then let it go.The installation is finished.
3. Rotate the synchronus turn knob with handspress the vertical giving handle slowly,make it aim at the original key hole,l-o-ck the regular
knob of the slide,then can  get into the first listen of holing.
4. After finishing the first line of holes bores and pares move the synchronous turn knob,get into and pare the second line of holes after
aiming at repeat above-me ntioned steps and finish boring other holes.
The cannelure reaming boring and paring
As the concave nest of the key is grater than leading needle or boring and paring the oval concave nest,
it need to carry on reaming and bore paring at this moment,when reaming is pared,the cross slide should
move slowly in the counterclo-ckwise c-loc-k direction(Fig.7),If the direction of the cross slide is wrong,
it may easily to have damaged cutter.
The cuts of the wave type cannelure:
1.Install the leading needle,and lo-c-k the regular srews.(Fig.1)
2.Move the verical depth buttons in cl-oc-kwise direction(consults Fig.2) till the spring is totally compressed.
3.Fetch a name card(thick about 0.2) and put it on the surface of the jig under the leading needle.
4.Put the cutter into axis hole,hen press the vertical giveing handle slowly,make the name card happen to be
pressed during leading needle and jig.
5.Pull down cutter gently,make terminal surface of the cutter and jig surface contact ench other (Fig.8),
then l-oc-k cutter's regular screw along the direction of the c-lo-ck.
6. Put the original key into the jig and l-oc-k the rotary handle of the jig.
7. Place one corner of name card on the cut part of original,then press down vertical giveing handles slowly,
press one corne of name card on the cut part of leading needle and original spoon,then lo-c-k the vertical
depth of regular screw along the direction of the cl-oc-k,at this moment the vertical moving is totally dispelled(Fig.9)
8. Pack the jig into the base of the spoon,and move the handle of the jig,fasten it.
9. Starting the motor,move the cross slide moves in the wrong direction,It will damage the cutter.
Please Note
Warranty
Feedback
Payment
Contact US
If  you need to return the item for some reasons, please contact us via eBay message at the first time to get the RMA# and return address instead of sending back directly without permission,thank you!
1. Most of our items have
3 years warranty.
2. All our items have been tested good before shipping.
3. We provide buyer return and refund service. If you are not satisfied when you receive your item,
please return it within 30 days for a replacement or money back. Buyer pay the shipping cost.
If you are satisfied with our items and service, Your positive feedback with good full stars to the
5 DSR
s
will be much appreciated.
If you are not satisfied with your shopping experience, please contact us before you decide to leave a neutral or negative feedback.
Since Neutral or Negative feedback won't solve any question. We will do our best to solve the problem for you as soon as possible.
1.We only accept paypal.
2.Please make payment within 7 days after auction ended, if not,we have to open an unpaid cace to get our final value fee back from ebay.
So please contact us timely before we take this action.Thanks!
3.We don't responsible for any custom duty or import cost.
4.Please tell us the value/name of the item you want for custom delaration if you have any special requirement,or we will fill the custom
declaration which is suitable for most countries accordingly.
If there is any problem, please contact with us by eBay message First, we will reply you within 48 hours,.
Sorry for delay reply on weekend.
Welcome to visit my store
carobdtool88
Please Note
If  you need to return the item for some reasons, please contact us via eBay message at the first time to get the RMA# and return address instead of sending back directly without permission,thank you!
Warranty
1. Most of our items have
3 years warranty.
2. All our items have been tested good before shipping.
3. We provide buyer return and refund service. If you are not satisfied when you receive your item,
please return it within 30 days for a replacement or money back. Buyer pay the shipping cost.
Feedback
If you are satisfied with our items and service, Your positive feedback with good full stars to the
5 DSR
s
will be much appreciated.
If you are not satisfied with your shopping experience, please contact us before you decide to leave a neutral or negative feedback.
Since Neutral or Negative feedback won't solve any question. We will do our best to solve the problem for you as soon as possible.
Payment
1.We only accept paypal.
2.Please make payment within 7 days after auction ended, if not,we have to open an unpaid cace to get our final value fee back from ebay.
So please contact us timely before we take this action.Thanks!
3.We don't responsible for any custom duty or import cost.
4.Please tell us the value/name of the item you want for custom delaration if you have any special requirement,or we will fill the custom
declaration which is suitable for most countries accordingly.
Contact US
If there is any problem, please contact with us by eBay message First, we will reply you within 48 hours,.
Sorry for delay reply on weekend.
Welcome to visit my store
carobdtool88
powered by